unfiform

Nieuws SV AVRM

Instellen van een FFP (First Focal Plane) scope

Try this if you're having issues or if you've never setup the diopter and parallax before. I had to figure this out the hard way. I've never seen it clearly spelled in a scope manual that worked. Here's how I do it and the process works.

1) Set to Max Power
2) Parallax set to Infinity (this is very important)
3) Point it at a solid, light background like a white wall or blue sky. You don't want anything except a solid, light color to look at.
4) Start from the diopter all the way into the occular and rotate out. Don't stare into the optic, open and close your eye as you adjust such that you have no more than about 1 second open, 4-5s closed.

In short order you can get the diopter very closely adjusted such that it will be crisp at all but the finest areas of the reticle.

Once you're there, small adjustments are made and you should focus your attention to the smallest details such as 1/10th mil hash marks, square corners in the reticle, etc.

Flick your eye open, then closed. Look at the reticle picture and see if it's crisp. Repeat as necessary until you have the diopter adjusted properly.

Lock down the ring on your diopter or wrap it with electrical tape and lock it down. Perhaps a sharpie with a witness mark between the occular and diopter ring.
Something to reference it for the inevitability that it will get bumped.
S&Bscope

NAAR BOVEN
NAAR BENEDEN

svavrm

Wij gebruiken cookies op onze web site. Sommigen zijn essentieel voor het correct functioneren van de site, terwijl anderen ons helpen om de site en gebruikerservaring te verbeteren (tracking cookies). U kan zelf kiezen of u deze cookies wil toestaan of niet. Let op dat als u onze cookies weigert mogelijk niet alle functies van de site beschikbaar zijn.